Resolve PHILIPS TV problem and Tips to Repair

PHILIPS

Size	Model	Chassis	Symptom	Problem Description	Fix
	PTV780AH01	PTV780	audio	poor audio on one channel, no audio on others	IC120 and surronding .15uF/63V mylar caps
19	CCT190AT01		Power	No power up, relay clicks, hi voltage up then back down	IC603 (5V regulator, 4835-209-88129, ICG1960)
25	25TSC6-101	25B5	Dark Screen	Dark Screen	CRT Rejuvenated, also turned up screen voltage
25			Scrolling Lines	Horizontal Lines Scrolling up/down on the screen	Replaced filter capacitor
27	27PT5445/37	L03.1UAA	Video	Vertical foldover about 3/4 of the screen. Then shutdown	C2463 (10uF/160v, near vert output transistors), D6460 (SMD located under C2463)
27	27PT6441/37	L04.1UAA	Video	Vertical foldover at top of screen	C2465 (10uF/100V), if still not working replace D6457 (SMD)
27	27PT6441/37	L04.1UAA	Power	Blows Fuse	deguassing thermister 3525 (#2122-6630-0019)
27	TS2744 C103	27B8	White picture	Burnt Resistor on CRT neck board	R58 (22 Ohms)
32	32PT563S	L01.1UAC	Power	shuts down in 10 seconds	C2463 (680pF/2KV, #4835-122-47584), C2455 (47uF/50V)
32	32PT663R37	L01.1UAC	Power	shutdown	D6447 (1N4148), R3451 (3.9ohm), C2455 in horz drive
32	32PT663R37A	L01.1UAC	Shuts Down	Shuts off as soon as picture turns on	R3451, D6447, adjust Screen to just below retrace lines.
42	42PW99-6217	FTV1.5U	No Picture	Redish Vertical Lines for 2 seconds at startup	Replace PDP, cost prohibitive to replace, junked
50	50MF231D/37	Plasma	Power	Won't start, or starts intermittently	C8059=C8060 (3300uF/10V, in power supply)
50	50PP920217	DPTV305	Video	Video gets dark as set warms up	Replace the HDR board
50	50PP920217	DPTV305	Video	Picture gets darker as it warms up, and eventually flickers on and off	IC7212 (T1431/AN1431, 3 pin regulator on standby supply module), optoisolator 7213 (NTE3041)
55	55PP9352/17	DPTV310	Video	pic gets darker from left side as warms up, then on and off	HDR module
60	7P6030-W101		dead	Clicks On then Off	HOT (2sd2539)
		L04.1U	Video	Video shifted to Right	C2486 (27pF/500V ceramic)
		P1	Power	Power Supply drifts from 130V	R428, IC400, Z430
		P1	Power	Set won't power off	IC402 (optoisolator, ECG3041)

Source : http://www.riddledtv.com/repair/philips.html