Substitute AKIRA Flyback BSC 25-1055

PENGGANTI FLYBACK AKIRA: BSC 25-1055

I was confused to get the TV AKIRA 14 "broken his FBT, which bertype: BSC25-1055 KONKA.Karena the mechanic made in jakarta in particular the most allergic to the artificial FBT Konka, because spare parts are difficult to obtain.Fortunately I since 2000.selalu records and record the composition of the pins from the legs of each flyback all kinds type ever signed in ZIC WORKSHOP (our garage).After I observe it turns out there is no equation of the type of this type, then the only way is to modify the flyback-like arrangement of legs.Of the many, my choice fell on the flyback Goldstar with type 154-177B or 154-064P (the second type are identical)

The order of pin FBT bsc25-1155 is as follows:
1.PIN1 = Coll (H-OUT)
2.PIN2 = B + (VCC)
3.PIN3 = 180V (VIDEO OUT VCC)
4.PIN4 = GROUND
5.PIN5, PIN6 = N.C (TAKTERPAKAI)
6.PIN7 = ABL
7.PIN8 = HEATER
8.PIN9 = N.C (TAKTERPAKAI)
9.PIN10 = AFC
While the sequence of FBT 154-177B or 154-064P is as follows:
1.PIN1. = Coll (H-OUT)
2.PIN2. = B + (VCC)
3.PIN3 = 180V (VIDEO OUT VCC)
4.PIN4 = GROUND
5.PIN5 = 15V
6.PIN6 = 24V
7.PIN7 = 40V
8.PIN8 = ABL
9.PIN9 = HEATER
10.PIN10 = AFC.
The trick is to modify it as follows;
After the original FBT (BSC25-1055) have been removed, disconnect the line by cutting the pcb track (using the cutter) that led to the hole (pin) 7 and pin8, while pin9 already free (NC). Input FBT-154 FBT 177b into the socket. after a certain point and pin8 pin7 been disconnected, jumper (plug) pin (feet) 9 to the line who headed pin8.dan pins (legs) 8 is also connected to the line that led to the pin external pin7.setelah ABL from fbt154-177b combine with pins (legs) 8.
flyback ready for action, and good, no slightest difference to the original appearance, such as image width and Tinggih images, as well as temperature rise TR. Hor-out is also very normal.
TV sets were ready for action .. JUST DO IT.