RESET CODE TV CRYSTAL

CRYSTAL TV sometimes and even often have problems in IC memory. Is condition where the TV does not want to start (just standby) even though the power button on the remote already in the press many times. This incident often can I do if my petir.Dugaan rainy season and damage This occurs because the TV exposure induced by lightning from the grid or antena.Tapi also not uncommon to happen by itself.
First I always replace memory IC which bertype: 81DC (IC actually this is a general memory IC that is 24c08, and who is 24co4 bertype 41DC).
If you do not have a backup memory "real" her, or who have been programmed, then there is no other way, we have to reset the memory IC otomatis.Dengan records are not physically damaged or short.
The trick is as follows: turn on the TV and leave it on standby (protectionism), take the remote control: Press the OK button and the Power button on the remote, hold about 3 seconds, wait until the TV automatically turns on.
Check the picture and sound, if no reply is not normal, immediately go into service mode menu to reset the parameters utama.Karena if not, someday TV will return terprotek back.
Here I often get this case on the type C-201 (20 ") and C -1 401 (14").
To enter the service mode, in standby press simultaneously vol () and VOL (-) on tv and tv stand up to turn on automatically to a position of service mode.
Apparently the trick is often helped me over the kitchen work.
Hopefully useful for you.

Original Source : zicelectronic.blogspot.com 
Translate by google