Toshiba LCD Television Service Menu

TOSHIBA TV SERVICE MENU CODE is the code to enter into the condition of “SERVICE MODE“. In terms repair television there are several ways, including using the code number or alphabet or a combination of both.I was using hardware tricks to the way right at the point to short/jumper / or provided in the switch

Toshiba LCD TV

Put the volume on 0, then hold the volume down button, while holding the number 9 on the remote. it should pop up. just try not to dick around with the settings tho.

OR

  Press the {MENU} button on the remote.

  Highlight the “Picture” icon.

  Press the {9} {3} {0} {1} buttons

on the remote control.

  The Service Menu will be displayed

with the following Modes:

“Options” – “Adjustments” – “Selections”

  Use the {OK} button to access and

navigate through these Modes.

  To change values use {VOL +} {VOL-) {P+} {P-}

  To exit, press the {MENU} button.

NOTICE: MUST READ BEFORE USING SERVICE CODES!!!

Service Menu Code is the mode where we can restore or repair setting television programs into the new conditions or reset to Standard Factory Mode. If there are errors in the command key presses can cause permanent damage or other damage that may occur.This step needs to be done if we found specific damage caused by abnormal of IC EEPROM program code so that trick may not work for the damage on the block other block program.

soderblogs not responsible for any errors that may occur, if you do not have expertise in this code tv please do not use the code. Call Your Television Service Center to get professional services