SAMSUNG TV Repair Tips
TV Repair Tips
SAMSUNG
Size | Model | Chassis | Symptom | Problem Description | Fix |
---|---|---|---|---|---|
17 | LTN1765X | LCD | Dead | Power light blinks, but won't turn on | C21, C43, C53, C54, C55, C57, C4276 (all 10uF/16V) |
25 | TXG2547 | Vertical | Vertical Circuit had dry solder connection | Resoldered Vertical IC | |
27 | TXT2782QX | Power | Blows Fuse | Replace PT802S with a 4.5ohm thermistor (#1404-001154) | |
30 | TX-R3079WHX/XXA | Dead | Dead, Fuse blown | Change Thermister and fuse (1404-0012776) | |
32 | TXN3298HFX | Power | Set shuts down intermittently | Resolder flyback pins | |
40 | LN0S4051D | LCD | Power | Won't turn on, clicks repeatedly | C115 and C123, or just replace power supply (BN96-03775A) |
42 | HLS4266W | Power | shuts down intermittently | door switch cover not fully closed, check switch operation | |
42 | PPM42S3 | Plasma | Video | No picture, but has sound | power supply (BN96-00249A) or C524=C525 (0.22uF/400V mylar) |
43 | HLM437W | L2 | Power | Timer, lamp and temp LEDs blinking | replace ballast and lamp assemblies |
46 | HL-R4667W | Video | Green bars in pic, and pic mostly green | replace digital module | |
50 | HLN5065WX/XAA | Video | Diagonal herringbone type interference appearing in all inputs | Defective digital pcb. Remember on these models, both the digital and analog PCB?s must be replaced at the same time. | |
50 | HLN507WX/XAA | Video | Diagonal herringbone type interference appearing in all inputs | Defective digital pcb. Remember on these models, both the digital and analog PCB?s must be replaced at the same time. | |
50 | HLS-5086WX | DLP | Video | White spots scattered around the screen | DLP chip (#4719-001981) |
60 | HL-R6167 | Power | Plays for a while, then shuts off | Open lamp door, check safety switch, and close door making sure the lever is facing downward | |
61 | HLS-6167WX | Power | Shuts off within 3 minutes | 1. Power on DLP TV 2. Check whether TV shuts off or not within minutes. 3. If TV shuts off in 3 minutes, replace both Ballast and Lamp. 4. If TV doesn?t shut off but the picture is dark, replace the Lamp only. Ballast # BP47-00037A | |
All LCD models | Video | Right half of pic is missing | Reseat LVDS cable at the T-con board | ||
LNT Series | Video | Horizontal lines across screen | Replace T-CON board | ||
L5 | Power | Timer, lamp and temp LEDs blinking | replace ballast and lamp assemblies |
Source : http://www.riddledtv.com/repair/samsung.html
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home