Multi Function POWER SUPPLY REGULATOR

There is a kit / module ready for use: REGULATOR GACUN gz.jiachun artificial china extremely versatile and very easy to be applied to any regulator.
Why do I say so? because in certain conditions the application of this kit is only enough cable to attach the two pieces saja.Sebuah breakthrough very useful (thanks GACUN).
Regulators whatever and however it is still good for a converter transformer, these kits can work well to replace the regulator circuit aslinya.Buang away all the original regulator circuit path (of course who have been damaged and can not be in the repair again) the primary, and we only need two pasang.Yaitu point pin transformer that is connected with the input voltage (VCC) is usually 300V, and the pins are headed to the collector transistor / IC regulators.
The way its setup is extremely easy. Regulator gacun only have three (3) cable channels; red is the VCC input transformer will be installed at the point reply to the collector TR / IC regulator.kabel black is ground (negative) and blue cable is for feedback (detector output voltage changes, this cable can be installed or else be left alone (it is great).
Allow / do in the off capacitor and resistor which are dijalur VCC to the collector (capacitor / resistor oscillation transformer usually start 680pF-2n2F/2KV).
Connect the black wire to ground. attach the red wire to the foot of collector transformer (red wire is assumed as a replacement collector TR / IC), and blue cable into the path of optocoupler, if any.
Rotate the trimpot gacun the minimum position to the left-out (CCW). Supply.dan turn on the power regulator output voltage set properly. TV typically 115V to B nya.5V to regulators DVD etc..

Very easy to apply, just try both for TV14-29 ", VCD / DVD or monitor.karena this module is encased in a very neat and protected by its chassis is quite tiny.